X-SIM First Generation Micro and Nano Adapter Installation Manual

 

iPhone 4S Activation

1. Insert SIM card (without PIN code) together with X-SIM
2. Phone will prompt "SIM LOCKED"
3. Click "Unlock"
4. Enter 7 digits IMSI

 

First initialization (for already activated phones)

1. Insert SIM card (without PIN code) together with X-SIM
2. Phone will prompt "SIM LOCKED"
3. Click "Unlock"
4. Enter 7 digits IMSI 
* IMSI List Can Be Found HERE
5. Wait for signal

 

Disable PIN code request

Settings -> Phones -> SIM PIN (Select "Off") -> Enter 88888888 -> click "Done"

 

Enable PIN code request (Enable IMSI input)

Settings -> Phones -> SIM PIN (Select "On") -> Enter 00000000 -> click "Done"

 

Enable PIN code on SIM card

Settings -> Phones -> SIM PIN (Select "On") -> Enter your PIN (cannot be 00000000 or 88888888) ->
Click "Done"

 

X-SIM First Generation Firmware Upgrade Manual

 PDF Firmware Upgrade Manual v1.0

 

 

X-SIM EVO Second Generation Micro and Nano Adapter Installation Manual

1) Insert X-SIM EVO with your Sim Card (Align and Squeeze, Insert Gently)
* Before Insert X-SIM EVO and SIMCard Make Sure You Removed Sticky Protection Tape From Adapter and Make Sure Adapter is Properly Stuck to SIMCard

2) Wait patiently X-SIM Carrier Menu Pop Up and select carrier your iPhone is Locked To
* If in the list you cannot find your Carrier you need Insert IMSI yourself
* IMSI List Can Be Found HERE
* Note that some SIMCards in combination with X-SIM EVO will ask you Enter 8'th Digit (can chose any digit from 1 to 9 - Also can be applied in case of No Network or Other problems with 7-digit IMSI usage)
 
3) At the next Menu select 'Accept' and immediately Reboot your iPhone
* In case IMSI code cannot be Confirmed (when press Input IMSI it does nothing) you need Format iPhone